Armed Polite Society
November 22, 2019, 11:50:49 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: R.I.P. Scout26
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Sentimental vintage tool thread  (Read 511 times)
Kingcreek
friend
Senior Member
***
Posts: 1,817


« on: October 21, 2019, 12:33:07 PM »

We sometimes post fondly about various tools and things. (My wife and some others wouldn't understand.)
I was gifted an oxy/acetylene torch set from an old family friend who also left me my first welder when he died at the age of 92. He started gas welding in the 1930s and later built a nice shop and did welding jobs for neighbor farmers and others. When he insisted I take his very old victor torch set he told me how that was all he had for cutting, brazing, welding when he started out.
His old victor set has worked fine for the 4 years I've had it, until 2 weeks ago. A seat in the oxy reg failed and it "barked" hard when I tried to set the torch pressure. I have enough respect for the system to be a little scared. I sent both regs off to Regulator and Torch exchange, inc.
Got them back today and golly I can't believe it but they look like new! Totally cleaned, refurbished with new springs, diaphragms, lenses, seats, etc. they were almost black before and now are beautiful gleaming brass.
Cost me $125 for both with shipping but I wouldn't trade them for a new set, even in the condition they were in before.
Even tools can have sentimental value. Old Howard would be proud. Now I wish I had sent the torch body in with them, and I still might send it to them.
Report to moderator   Logged

What we have here is failure to communicate.
RoadKingLarry
friends
Senior Member
***
Posts: 16,708



« Reply #1 on: October 21, 2019, 12:37:29 PM »

I understand completely.
While none of them are worth any real money some of my most treasured possessions are the old tools handed down from family members.
Report to moderator   Logged

If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or your arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that you were our countrymen.

Samuel Adams
Hawkmoon
friend
Senior Member
***
Posts: 20,747



« Reply #2 on: October 21, 2019, 02:20:26 PM »

I absolutely understand.

I cherish an old carpenter's claw hammer I got from my first wife's grandfather. He was going to toss it because the handle was broken. I took it because it was his, and I replaced the handle. It's basically useless -- the head apparently wasn't properly hardened, so it's badly chipped and mushroomed, and I think it would be dangerous to use it. But I appreciate it as a memento of the man.

And then there's my father's Estwing hatchet. One of the ones with the stacked leather washer handles. My father had managed to damage it even before I was born, so it was always missing about three or four leather washers, and the handle has a slight bend. (Note: How the heck can ANYONE bend the handle on an Estwing?) I would cheerfully pay whatever price they wanted to have Estwing rebuild the handle ... but they won't. "Liability issues," they say. So I bought a bag of leather washers and one of these days I'll do it myself. Don't need it -- I have three other very serviceable hatchets. Sometimes you just want that tool to be made right.
Report to moderator   Logged
Brad Johnson
friend
Senior Member
***
Posts: 14,516


Witty, charming, handsome, and completely insane.


« Reply #3 on: October 21, 2019, 02:28:53 PM »

Seconding (and thirding) the above. Sentiment is a big thing for me, too.

I still have, and use every day, the Challenger (Proto value line) wrench and socket sets my parents gave me for my 16th birthday. Wouldn't trade them for anything, much less money. The Kennedy box they came in is still in good shape, too.

Brad
Report to moderator   Logged

It's all about the pancakes, people.
"And he thought cops wouldn't chase... a STOLEN DONUT TRUCK?Huh? That would be like Willie Nelson ignoring a pickup full of weed."
-HankB
AZRedhawk44
friends
Senior Member
***
Posts: 12,242



« Reply #4 on: October 21, 2019, 02:36:23 PM »

My grandfather recently gave me a huge amount of various hand tools.  Most are redundant to what I already have... but each of them has his Oregon Driver's License # etched into them.  It was evidently something he did as an anti-theft measure.  Nevermind he hasn't lived in Oregon for 15+ years.  Tickles the feelz, it does, when I pick them up and think of myself at 8 years old, watching him work with the same tools in his old house in Oregon.
Report to moderator   Logged

"But whether the Constitution really be one thing, or another, this much is certain - that it has either authorized such a government as we have had, or has been powerless to prevent it. In either case, it is unfit to exist."
--Lysander Spooner

I reject your authoritah!
Boomhauer
Former Moderator, fired for embezzlement and abuse of power
friends
Senior Member
***
Posts: 12,227



« Reply #5 on: October 21, 2019, 04:31:50 PM »

My grandfather on my mothers side was a millwright at the local cotton mills and my father could fix anything with hardly nothing. I have tools from both in my box at work.. Both are gone now but I remember them fondly each time I use one of the tools they passed along

One of the tools my grandfather left me was a Snap On ratchet. It was broken but surprisingly the  driver had a kit on his truck for it. He even looked up the date code for me...made in 1940.
Report to moderator   Logged

Quote from: Ben
Holy hell. It's like giving a loaded gun to a chimpanzee...

Quote from: bluestarlizzard
the last thing you need is rabies. You're already angry enough as it is.

OTOH, there wouldn't be a tweeker left in Georgia...

Quote from: Balog
BLOOD FOR THE BLOOD GOD! SKULLS FOR THE SKULL THRONE! AND THROW SOME STEAK ON THE GRILL!
Kingcreek
friend
Senior Member
***
Posts: 1,817


« Reply #6 on: October 22, 2019, 05:38:45 AM »

The more I think about it, the more I realized I have around here.
My paternal grandfather was an auto mechanic for 49 years and I have a few of his hand tools and a giant spade handled all metal beast of a 1/2" drill. My maternal grandfather was a Swedish woodworker that started as a pattern maker at a foundry. I have a few of his tools also.
When I was 16 and bought my first car (1970 Chevrolet Malibu) I saved my money for tools and bought craftsman at the local Sears store. Still have my early 70s tool box and wrenches, sockets, screwdrivers.
And then there are my axes and hatchets. I have too many but they have all been rehafted and edged and reconditioned, some with leather covers and sheaths. All are vintage from the little keen Kutter hatchet to the big Gamble's artisan double bit axe. A few tru temper Collins and plumb axes in between.
Someday, they will probably all get thrown on a hay rack for grubby auction scroungers to paw and pick through...
Report to moderator   Logged

What we have here is failure to communicate.
brimic
friends
Senior Member
***
Posts: 13,470



« Reply #7 on: October 22, 2019, 01:16:55 PM »

I have some floppy disks somewhere... they donĺt make them like they used to.
Report to moderator   Logged

"now you see that evil will always triumph, because good is dumb" -Dark Helmet

"AK47's belong in the hands of soldiers mexican drug cartels"-
Barack Obama
RoadKingLarry
friends
Senior Member
***
Posts: 16,708



« Reply #8 on: October 22, 2019, 05:07:41 PM »

Four of the planes in this picture come from older family.
Two were from my grandpa, 1 from dad and one from my uncle (dad's older brother).
I use all of them at least a little
Bottom to top:
Stanley #60
Miller's Fall #8 -Grandpa
Stanley #4 -Grandpa
Wood River #4-1/2
Stanley #5 -Dad
Stanley #7 -uncle

Report to moderator   Logged

If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or your arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that you were our countrymen.

Samuel Adams
French G.
friend
Senior Member
***
Posts: 7,989


ohhh sparkles!


« Reply #9 on: October 23, 2019, 06:42:48 AM »

I have a lot, soon a metric whole lotta more.

My dad gave me my first anvil, excellent specimen for its kind, not a heavy user for how it's constructed, I keep it for light hammers.

And he gave me his first hammer when I was five, he got it at about the same age.

And I now have his beast of a drill press, weighs more than most Mills I think, cloth belt, stepped pulleys, made in the late 19th or early twentieth century when we still made tools beautiful.

Not sentimental, but I often watch junk sales for antique tools. My daily use cold chisel has been beaten with a six pound hammer and the back hasn't begin to mushroom, just can't buy steel like that anymore.
Report to moderator   Logged

AKA Navy Joe   

I'm so contrarian that I didn't respond to the thread.
Kingcreek
friend
Senior Member
***
Posts: 1,817


« Reply #10 on: October 30, 2019, 11:59:50 AM »

I think I might have a weakness.
I just heard about a person I know whose father went into a nursing or assisted living facility. He used to have a Christmas tree farm but also used to go to every farm auction or estate sale and bring home truckloads of old tools of every kind. Apparently he has a barn and 2 or 3 buildings full. The family doesn't want to have an auction yet because he still likes to have them drive him out to the farm so he can poke around and check on things.
Im going to figure out how to tactfully ask about it or atleast be kept in the loop for any upcoming opportunity. I spose it's more likely somebody will steal it all and sell it for scrap before I get a shot at any of it. A vacant rural property is pretty vulnerable around here. I have a neighbor about 2 miles away that came home from a mission trip of all things to find his shop cleaned out of all his tools and power equipment. They even stole his trailer to haul it away on!
Report to moderator   Logged

What we have here is failure to communicate.
French G.
friend
Senior Member
***
Posts: 7,989


ohhh sparkles!


« Reply #11 on: October 30, 2019, 09:51:52 PM »

We got a 1950s McCullough chainsaw running tonight. To my knowledge the way time it was fired 44 year old me wasn't around, or a toddler. The saw is not light.

Also fired the newer of two Maytag motors up for the hell of it.
Report to moderator   Logged

AKA Navy Joe   

I'm so contrarian that I didn't respond to the thread.
Kingcreek
friend
Senior Member
***
Posts: 1,817


« Reply #12 on: October 31, 2019, 04:30:14 AM »

You should take the power saw to buckinstock.
If you donĺt know about buckinstock look buckin billy ray smith videos on the YouTube. He is funny as hell, a Vancouver logger and tree man that has a bunch of vintage McCullough and hotrodded saws. He has an annual power saw get together for his followers.
I finished refinishing repainting my vintage stihl ôfuel and toolö can. Now I need to find some stihl decals for the sides.
Report to moderator   Logged

What we have here is failure to communicate.
230RN
friend
Senior Member
***
Posts: 13,548


Your free speech ends at the tip of my nose.


« Reply #13 on: November 02, 2019, 01:18:41 PM »

My Pop had one of these Black and Deckers around for a significant portion of forever.  So I inherited it along with a bunch of his tools and musical instruments.  I had to leave most of it in NY when we moved out here, but I made sure I brought that drill.  Mine's in much better shape than this net picture and I mounted a 3/8" chuck on it.

    Not mine but identical except for the chuck:
    

Terry

Pic credit in properties.

Report to moderator   Logged

Use any lie, any promise, any illogic that sounds good or feels good in order to get elected.  The end justifies the means, after all.
brimic
friends
Senior Member
***
Posts: 13,470



« Reply #14 on: November 04, 2019, 09:22:25 AM »

My Pop had one of these Black and Deckers around for a significant portion of forever.  So I inherited it along with a bunch of his tools and musical instruments.  I had to leave most of it in NY when we moved out here, but I made sure I brought that drill.  Mine's in much better shape than this net picture and I mounted a 3/8" chuck on it.

    Not mine but identical except for the chuck:
    

Terry

Pic credit in properties.



I remember my grandfather (a Linesman) had one of those with probably a 1/2" chuck. I just recall him boring out big holes in a post for a mailbox or something with it.
Report to moderator   Logged

"now you see that evil will always triumph, because good is dumb" -Dark Helmet

"AK47's belong in the hands of soldiers mexican drug cartels"-
Barack Obama
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
├ťmraniye escort ankara escort Kartal Escort ata┼čehir escort pendik escort ┼či┼čli escort kurtk├Ây escort ankara escort ankara escort avc─▒lar escort istanbul travesti escort bayan escort avc─▒lar escort antalya escort ankara escort istanbul escort t├╝rk porno ─░stanbul Escort Ankara Escort Bayan taksim escort maltepe escort Ankara Escort ├çankaya Escort ┼×irinevler Escort Eryaman Escort Rus porno Eros Porno Bah├že┼čehir Escort ankara escort Sincan Escort Bayan ┼či┼čli escort Maltepe Escort Etlik Escort Kurtk├Ây Escort Kurtk├Ây Escort Demetevler Escort Bodrum Escort Bayan Escort be┼čikta┼č Ankara Escort Taksim Escort Bayan ├ťmraniye Escort ankara escort Keci├Âren Escort Escort Ankara Etiler Escort Bayan porno altyaz─▒ Halkal─▒ Escort Bayan Kad─▒k├Ây Escort Escort bayanlar Escort ankara Ankara Escort Bayan Kurtk├Ây Escort Kurtk├Ây Escort Escort ─░zmir Escort Mersin Escort beylikd├╝z├╝ Beylikd├╝z├╝ Escort Atak├Ây Escort Escort izmir Ankara escort Antalya escort Ankara Escort Altyaz─▒l─▒ Porno Altyaz─▒l─▒ Porno Esenyurt Escort Bakirkoy Escort Beylikd├╝z├╝ Escort Bah├že┼čehir Escort Porno izle izmir escort Pendik escort Bostanc─▒ Escort